Arc Node

Arc Node.

The Arc node generates a poly spline arc. The node has two modes, Radius and Points.

分辨率

Number of edges on the arc.

半径

The radius of the arc. Radius mode only.

Start Angle

Starting angle of the arc. Radius mode only.

Sweep Angle

Length of the arc. Radius mode only.

Connect the arc at the center.

Invert Arc

Invert and draw opposite arc.

Start, Middle, End

The three points on the arc. Points mode only. The order of the points determines the direction (clockwise or counterclockwise) of the arc. The arc will always draw from Start to End via the Middle point. This can be changed by using the Invert Arc option.

Offset Angle

Offset angle of the arc. Points mode only.

Note

Because of the finite resolution, the middle point does not necessarily lie on the generated arc.

模式

曲线

Poly spline generated from the inputs.

中心

The center of the arc described by the three points. Points mode only.

法向

The normal direction of the plane described by the three points, pointing towards the positive Z axis. Points mode only.

半径