When defining a function that uses generics, we place the generics in the signature of the function where we would usually specify the data types of the parameters and return value. Doing so makes our code more flexible and provides more functionality to callers of our function while preventing code duplication.

    Continuing with our function, Listing 10-4 shows two functions that both find the largest value in a slice.

    Filename: src/main.rs

    Listing 10-4: Two functions that differ only in their names and the types in their signatures

    The largest_i32 function is the one we extracted in Listing 10-3 that finds the largest i32 in a slice. The largest_char function finds the largest char in a slice. The function bodies have the same code, so let’s eliminate the duplication by introducing a generic type parameter in a single function.

    To parameterize the types in the new function we’ll define, we need to name the type parameter, just as we do for the value parameters to a function. You can use any identifier as a type parameter name. But we’ll use T because, by convention, parameter names in Rust are short, often just a letter, and Rust’s type-naming convention is CamelCase. Short for “type,” T is the default choice of most Rust programmers.

    When we use a parameter in the body of the function, we have to declare the parameter name in the signature so the compiler knows what that name means. Similarly, when we use a type parameter name in a function signature, we have to declare the type parameter name before we use it. To define the generic largest function, place type name declarations inside angle brackets, <>, between the name of the function and the parameter list, like this:

    fn largest<T>(list: &[T]) -> T {

    We read this definition as: the function largest is generic over some type T. This function has one parameter named list, which is a slice of values of type T. The largest function will return a value of the same type T.

    Listing 10-5 shows the combined largest function definition using the generic data type in its signature. The listing also shows how we can call the function with either a slice of i32 values or char values. Note that this code won’t compile yet, but we’ll fix it later in this chapter.

    Filename: src/main.rs

    fn largest<T>(list: &[T]) -> T { let mut largest = list[0]; for &item in list { if item > largest { largest = item; } } largest } fn main() { let number_list = vec![34, 50, 25, 100, 65]; let result = largest(&number_list); println!("The largest number is {}", result); let char_list = vec!['y', 'm', 'a', 'q']; let result = largest(&char_list); println!("The largest char is {}", result); }

    Listing 10-5: A definition of the largest function that uses generic type parameters but doesn’t compile yet

    If we compile this code right now, we’ll get this error:

    $ cargo run Compiling chapter10 v0.1.0 (file:///projects/chapter10) error[E0369]: binary operation `>` cannot be applied to type `T` --> src/main.rs:5:17 | 5 | if item > largest { | ---- ^ ------- T | | | T | help: consider restricting type parameter `T` | 1 | fn largest<T: std::cmp::PartialOrd>(list: &[T]) -> T { | ^^^^^^^^^^^^^^^^^^^^^^ error: aborting due to previous error For more information about this error, try `rustc --explain E0369`. error: could not compile `chapter10` To learn more, run the command again with --verbose.

    The note mentions std::cmp::PartialOrd, which is a trait. We’ll talk about traits in the next section. For now, this error states that the body of largest won’t work for all possible types that T could be. Because we want to compare values of type T in the body, we can only use types whose values can be ordered. To enable comparisons, the standard library has the std::cmp::PartialOrd trait that you can implement on types (see Appendix C for more on this trait). You’ll learn how to specify that a generic type has a particular trait in the section, but let’s first explore other ways of using generic type parameters.

    We can also define structs to use a generic type parameter in one or more fields using the <> syntax. Listing 10-6 shows how to define a Point<T> struct to hold x and y coordinate values of any type.

    Filename: src/main.rs

    1. struct Point<T> {
    2.     x: T,
    3.     y: T,
    4. }
    6. fn main() {
    7.     let integer = Point { x: 5, y: 10 };
    8.     let float = Point { x: 1.0, y: 4.0 };
    9. }

    The syntax for using generics in struct definitions is similar to that used in function definitions. First, we declare the name of the type parameter inside angle brackets just after the name of the struct. Then we can use the generic type in the struct definition where we would otherwise specify concrete data types.

    Note that because we’ve used only one generic type to define Point<T>, this definition says that the Point<T> struct is generic over some type T, and the fields x and y are both that same type, whatever that type may be. If we create an instance of a Point<T> that has values of different types, as in Listing 10-7, our code won’t compile.

    Filename: src/main.rs

    struct Point<T> { x: T, y: T, } fn main() { let wont_work = Point { x: 5, y: 4.0 }; }

    Listing 10-7: The fields x and y must be the same type because both have the same generic data type T.

    In this example, when we assign the integer value 5 to x, we let the compiler know that the generic type T will be an integer for this instance of Point<T>. Then when we specify 4.0 for y, which we’ve defined to have the same type as x, we’ll get a type mismatch error like this:

    $ cargo run Compiling chapter10 v0.1.0 (file:///projects/chapter10) error[E0308]: mismatched types --> src/main.rs:7:38 | 7 | let wont_work = Point { x: 5, y: 4.0 }; | ^^^ expected integer, found floating-point number error: aborting due to previous error For more information about this error, try `rustc --explain E0308`. error: could not compile `chapter10` To learn more, run the command again with --verbose.

    To define a Point struct where x and y are both generics but could have different types, we can use multiple generic type parameters. For example, in Listing 10-8, we can change the definition of Point to be generic over types T and U where x is of type T and y is of type U.

    Filename: src/main.rs

    1. struct Point<T, U> {
    2.     x: T,
    3.     y: U,
    4. }
    6. fn main() {
    7.     let both_integer = Point { x: 5, y: 10 };
    8.     let both_float = Point { x: 1.0, y: 4.0 };
    9.     let integer_and_float = Point { x: 5, y: 4.0 };
    10. }

    Listing 10-8: A Point<T, U> generic over two types so that and y can be values of different types

    Now all the instances of Point shown are allowed! You can use as many generic type parameters in a definition as you want, but using more than a few makes your code hard to read. When you need lots of generic types in your code, it could indicate that your code needs restructuring into smaller pieces.

    As we did with structs, we can define enums to hold generic data types in their variants. Let’s take another look at the Option<T> enum that the standard library provides, which we used in Chapter 6:

    This definition should now make more sense to you. As you can see, Option<T> is an enum that is generic over type T and has two variants: Some, which holds one value of type T, and a None variant that doesn’t hold any value. By using the Option<T> enum, we can express the abstract concept of having an optional value, and because Option<T> is generic, we can use this abstraction no matter what the type of the optional value is.

    Enums can use multiple generic types as well. The definition of the Result enum that we used in Chapter 9 is one example:

    1. #![allow(unused)]
    2. fn main() {
    3. enum Result<T, E> {
    4.     Ok(T),
    5.     Err(E),
    6. }
    7. }

    The Result enum is generic over two types, T and E, and has two variants: Ok, which holds a value of type T, and Err, which holds a value of type E. This definition makes it convenient to use the Result enum anywhere we have an operation that might succeed (return a value of some type T) or fail (return an error of some type E). In fact, this is what we used to open a file in Listing 9-3, where T was filled in with the type std::fs::File when the file was opened successfully and E was filled in with the type std::io::Error when there were problems opening the file.

    When you recognize situations in your code with multiple struct or enum definitions that differ only in the types of the values they hold, you can avoid duplication by using generic types instead.

    We can implement methods on structs and enums (as we did in Chapter 5) and use generic types in their definitions, too. Listing 10-9 shows the Point<T> struct we defined in Listing 10-6 with a method named x implemented on it.

    Filename: src/main.rs

    1. struct Point<T> {
    2.     x: T,
    3.     y: T,
    4. }
    6. impl<T> Point<T> {
    7.     fn x(&self) -> &T {
    8.         &self.x
    9.     }
    10. }
    12. fn main() {
    13.     let p = Point { x: 5, y: 10 };
    15.     println!("p.x = {}", p.x());
    16. }

    Here, we’ve defined a method named x on Point<T> that returns a reference to the data in the field x.

    Note that we have to declare T just after impl so we can use it to specify that we’re implementing methods on the type Point<T>. By declaring T as a generic type after impl, Rust can identify that the type in the angle brackets in Point is a generic type rather than a concrete type.

    We could, for example, implement methods only on Point<f32> instances rather than on Point<T> instances with any generic type. In Listing 10-10 we use the concrete type f32, meaning we don’t declare any types after impl.

    Filename: src/main.rs

    Listing 10-10: An impl block that only applies to a struct with a particular concrete type for the generic type parameter T

    This code means the type Point<f32> will have a method named distance_from_origin and other instances of Point<T> where T is not of type f32 will not have this method defined. The method measures how far our point is from the point at coordinates (0.0, 0.0) and uses mathematical operations that are available only for floating point types.

    Generic type parameters in a struct definition aren’t always the same as those you use in that struct’s method signatures. For example, Listing 10-11 defines the method mixup on the Point<T, U> struct from Listing 10-8. The method takes another Point as a parameter, which might have different types from the self Point we’re calling on. The method creates a new Point instance with the x value from the self Point (of type T) and the y value from the passed-in Point (of type W).

    Filename: src/main.rs

    1. struct Point<T, U> {
    2.     y: U,
    3. }
    5. impl<T, U> Point<T, U> {
    6.     fn mixup<V, W>(self, other: Point<V, W>) -> Point<T, W> {
    7.         Point {
    8.             x: self.x,
    9.             y: other.y,
    10.         }
    11.     }
    12. }
    14. fn main() {
    15.     let p1 = Point { x: 5, y: 10.4 };
    16.     let p2 = Point { x: "Hello", y: 'c' };
    18.     let p3 = p1.mixup(p2);
    20.     println!("p3.x = {}, p3.y = {}", p3.x, p3.y);
    21. }

    Listing 10-11: A method that uses different generic types from its struct’s definition

    In main, we’ve defined a Point that has an i32 for x (with value 5) and an f64 for y (with value 10.4). The p2 variable is a Point struct that has a string slice for x (with value "Hello") and a char for y (with value c). Calling mixup on p1 with the argument p2 gives us p3, which will have an i32 for x, because x came from p1. The p3 variable will have a char for y, because y came from p2. The println! macro call will print p3.x = 5, p3.y = c.

    The purpose of this example is to demonstrate a situation in which some generic parameters are declared with impl and some are declared with the method definition. Here, the generic parameters T and U are declared after impl, because they go with the struct definition. The generic parameters V and W are declared after fn mixup, because they’re only relevant to the method.

    You might be wondering whether there is a runtime cost when you’re using generic type parameters. The good news is that Rust implements generics in such a way that your code doesn’t run any slower using generic types than it would with concrete types.

    Rust accomplishes this by performing monomorphization of the code that is using generics at compile time. Monomorphization is the process of turning generic code into specific code by filling in the concrete types that are used when compiled.

    In this process, the compiler does the opposite of the steps we used to create the generic function in Listing 10-5: the compiler looks at all the places where generic code is called and generates code for the concrete types the generic code is called with.

    Let’s look at how this works with an example that uses the standard library’s Option<T> enum:

    2. #![allow(unused)]
    3. fn main() {
    4. let integer = Some(5);
    5. }

    When Rust compiles this code, it performs monomorphization. During that process, the compiler reads the values that have been used in Option<T> instances and identifies two kinds of Option<T>: one is i32 and the other is f64. As such, it expands the generic definition of Option<T> into Option_i32 and , thereby replacing the generic definition with the specific ones.

    The monomorphized version of the code looks like the following. The generic Option<T> is replaced with the specific definitions created by the compiler:

    Filename: src/main.rs