Attaching a pod to an additional network

You can add a pod to an additional network. The pod continues to send normal cluster-related network traffic over the default network.

When a pod is created additional networks are attached to it. However, if a pod already exists, you cannot attach additional networks to it.

The pod must be in the same namespace as the additional network.

Prerequisites

• Install the OpenShift CLI ().

• Log in to the cluster.

Procedure

1. Add an annotation to the Pod object. Only one of the following annotation formats can be used:

   1. To attach an additional network without any customization, add an annotation with the following format. Replace <network> with the name of the additional network to associate with the pod:

   2. To attach an additional network with customizations, add an annotation with the following format:

      metadata:
        annotations:
          k8s.v1.cni.cncf.io/networks: |-
            [
              {
                "name": "<network>", (1)
                "namespace": "<namespace>", (2)
                "default-route": ["<default-route>"] (3)
              }
            ]

      1	Specify the name of the additional network defined by a NetworkAttachmentDefinition object.
      2	Specify the namespace where the NetworkAttachmentDefinition object is defined.
      3	Optional: Specify an override for the default route, such as 192.168.17.1.

2. To create the pod, enter the following command. Replace <name> with the name of the pod.

   $ oc create -f <name>.yaml

3. Optional: To Confirm that the annotation exists in the Pod CR, enter the following command, replacing <name> with the name of the pod.

   $ oc get pod <name> -o yaml

   $ oc get pod example-pod -o yaml
   apiVersion: v1
   kind: Pod
   metadata:
     annotations:
       k8s.v1.cni.cncf.io/networks: macvlan-bridge
       k8s.v1.cni.cncf.io/networks-status: |- (1)
         [{
             "name": "openshift-sdn",
             "interface": "eth0",
             "ips": [
                 "10.128.2.14"
             ],
             "default": true,
             "dns": {}
             "name": "macvlan-bridge",
             "interface": "net1",
             "ips": [
                 "20.2.2.100"
             ],
             "dns": {}
         }]
     name: example-pod
     namespace: default
   spec:
     ...
   status:
     ...

   1	The k8s.v1.cni.cncf.io/networks-status parameter is a JSON array of objects. Each object describes the status of an additional network attached to the pod. The annotation value is stored as a plain text value.

When attaching a pod to an additional network, you may want to specify further properties about that network in a particular pod. This allows you to change some aspects of routing, as well as specify static IP addresses and MAC addresses. To accomplish this, you can use the JSON formatted annotations.

Prerequisites

• The pod must be in the same namespace as the additional network.

• Install the OpenShift CLI (oc).

• You must log in to the cluster.

Procedure

To add a pod to an additional network while specifying addressing and/or routing options, complete the following steps:

1. Edit the Pod resource definition. If you are editing an existing Pod resource, run the following command to edit its definition in the default editor. Replace <name> with the name of the Pod resource to edit.

2. In the Pod resource definition, add the k8s.v1.cni.cncf.io/networks parameter to the pod metadata mapping. The k8s.v1.cni.cncf.io/networks accepts a JSON string of a list of objects that reference the name of NetworkAttachmentDefinition custom resource (CR) names in addition to specifying additional properties.

   metadata:
     annotations:
       k8s.v1.cni.cncf.io/networks: '[<network>[,<network>,...]]' (1)

3. In the following example the annotation specifies which network attachment will have the default route, using the default-route parameter.

   apiVersion: v1
   kind: Pod
   metadata:
     name: example-pod
     annotations:
       k8s.v1.cni.cncf.io/networks: '
       {
         "name": "net1"
       },
       {
         "name": "net2", (1)
         "default-route": ["192.0.2.1"] (2)
       }'
     containers:
     - name: example-pod
       command: ["/bin/bash", "-c", "sleep 2000000000000"]
       image: centos/tools

   1	The name key is the name of the additional network to associate with the pod.
   2	The key specifies a value of a gateway for traffic to be routed over if no other routing entry is present in the routing table. If more than one default-route key is specified, this will cause the pod to fail to become active.

The default route will cause any traffic that is not specified in other routes to be routed to the gateway.

$ oc exec -it <pod_name> -- ip route

To set a static IP address or MAC address for a pod you can use the JSON formatted annotations. This requires you create networks that specifically allow for this functionality. This can be specified in a rawCNIConfig for the CNO.

1. Edit the CNO CR by running the following command:

   $ oc edit networks.operator.openshift.io cluster

The following YAML describes the configuration parameters for the CNO:

Cluster Network Operator YAML configuration

The following object describes the configuration parameters for utilizing static MAC address and IP address using the macvlan CNI plug-in:

macvlan CNI plug-in JSON configuration object using static IP and MAC address

{
  "cniVersion": "0.3.1",
  "name": "<name>", (1)
  "plugins": [{ (2)
      "type": "macvlan",
      "capabilities": { "ips": true }, (3)
      "master": "eth0", (4)
      "mode": "bridge",
      "ipam": {
        "type": "static"
      }
    }, {
      "capabilities": { "mac": true }, (5)
      "type": "tuning"
    }]
}

The above network attachment can be referenced in a JSON formatted annotation, along with keys to specify which static IP and MAC address will be assigned to a given pod.

Edit the pod with:

$ oc edit pod <name>

macvlan CNI plug-in JSON configuration object using static IP and MAC address

apiVersion: v1
kind: Pod
metadata:
  name: example-pod
  annotations:
    k8s.v1.cni.cncf.io/networks: '[
      {
        "name": "<name>", (1)
        "ips": [ "192.0.2.205/24" ], (2)
        "mac": "CA:FE:C0:FF:EE:00" (3)
      }
    ]'

To verify the IP address and MAC properties of a pod with additional networks, use the oc command to execute the ip command within a pod.