Configuring Client Authentication

    When a Greenplum Database system is first initialized, the system contains one predefined superuser role. This role will have the same name as the operating system user who initialized the Greenplum Database system. This role is referred to as gpadmin. By default, the system is configured to only allow local connections to the database from the gpadmin role. If you want to allow any other roles to connect, or if you want to allow connections from remote hosts, you have to configure Greenplum Database to allow such connections. This section explains how to configure client connections and authentication to Greenplum Database.

    Parent topic:

    Client access and authentication is controlled by a configuration file named (the standard PostgreSQL host-based authentication file). For detailed information about this file, see in the PostgreSQL documentation.

    In Greenplum Database, the pg_hba.conf file of the master instance controls client access and authentication to your Greenplum system. The segments also have pg_hba.conf files, but these are already correctly configured to only allow client connections from the master host. The segments never accept outside client connections, so there is no need to alter the pg_hba.conf file on segments.

    The general format of the pg_hba.conf file is a set of records, one per line. Blank lines are ignored, as is any text after a # comment character. A record is made up of a number of fields which are separated by spaces and/or tabs. Fields can contain white space if the field value is quoted. Records cannot be continued across lines. Each remote client access record is in this format:

    A UNIX-domain socket access record is in this format:

    1. local   database   role   authentication-method

    The meaning of the pg_hba.conf fields is as follows:

    local

    Matches connection attempts using UNIX-domain sockets. Without a record of this type, UNIX-domain socket connections are disallowed.

    host

    Matches connection attempts made using TCP/IP. Remote TCP/IP connections will not be possible unless the server is started with an appropriate value for the listen_addresses server configuration parameter.

    hostssl

    Matches connection attempts made using TCP/IP, but only when the connection is made with SSL encryption. SSL must be enabled at server start time by setting the ssl configuration parameter. Requires SSL authentication be configured in postgresql.conf. See Configuring postgresql.conf for SSL Authentication.

    hostnossl

    Matches connection attempts made over TCP/IP that do not use SSL. Requires SSL authentication be configured in postgresql.conf. See .

    database

    Specifies which database names this record matches. The value all specifies that it matches all databases. Multiple database names can be supplied by separating them with commas. A separate file containing database names can be specified by preceding the file name with @.

    role

    Specifies which database role names this record matches. The value all specifies that it matches all roles. If the specified role is a group and you want all members of that group to be included, precede the role name with a +. Multiple role names can be supplied by separating them with commas. A separate file containing role names can be specified by preceding the file name with a @.

    address

    Specifies the client machine addresses that this record matches. This field can contain an IP address, an IP address range, or a host name.

    An IP address range is specified using standard numeric notation for the range’s starting address, then a slash (/) and a CIDR mask length. The mask length indicates the number of high-order bits of the client IP address that must match. Bits to the right of this should be zero in the given IP address. There must not be any white space between the IP address, the /, and the CIDR mask length.

    Typical examples of an IPv4 address range specified this way are 172.20.143.89/32 for a single host, or 172.20.143.0/24 for a small network, or 10.6.0.0/16 for a larger one. An IPv6 address range might look like ::1/128 for a single host (in this case the IPv6 loopback address) or fe80::7a31:c1ff:0000:0000/96 for a small network. 0.0.0.0/0 represents all IPv4 addresses, and ::0/0 represents all IPv6 addresses. To specify a single host, use a mask length of 32 for IPv4 or 128 for IPv6. In a network address, do not omit trailing zeroes.

    An entry given in IPv4 format will match only IPv4 connections, and an entry given in IPv6 format will match only IPv6 connections, even if the represented address is in the IPv4-in-IPv6 range.

    Note: Entries in IPv6 format will be rejected if the host system C library does not have support for IPv6 addresses.

    If a host name is specified (an address that is not an IP address or IP range is treated as a host name), that name is compared with the result of a reverse name resolution of the client IP address (for example, reverse DNS lookup, if DNS is used). Host name comparisons are case insensitive. If there is a match, then a forward name resolution (for example, forward DNS lookup) is performed on the host name to check whether any of the addresses it resolves to are equal to the client IP address. If both directions match, then the entry is considered to match.

    Some host name databases allow associating an IP address with multiple host names, but the operating system only returns one host name when asked to resolve an IP address. The host name that is used in pg_hba.conf must be the one that the address-to-name resolution of the client IP address returns, otherwise the line will not be considered a match.

    When host names are specified in pg_hba.conf, you should ensure that name resolution is reasonably fast. It can be of advantage to set up a local name resolution cache such as nscd. Also, you can enable the server configuration parameter log_hostname to see the client host name instead of the IP address in the log.

    IP-address

    IP-mask

    These fields can be used as an alternative to the CIDR address notation. Instead of specifying the mask length, the actual mask is specified in a separate column. For example, 255.0.0.0 represents an IPv4 CIDR mask length of 8, and 255.255.255.255 represents a CIDR mask length of 32.

    authentication-method

    Specifies the authentication method to use when connecting. See Authentication Methods for options.

    CAUTION:

    For a more secure system, consider removing records for remote connections that use trust authentication from the pg_hba.conf file. Trust authentication grants any user who can connect to the server access to the database using any role they specify. You can safely replace trust authentication with ident authentication for local UNIX-socket connections. You can also use ident authentication for local and remote TCP clients, but the client host must be running an ident service and you must trust the integrity of that machine.

    Editing the pg_hba.conf File

    Initially, the pg_hba.conf file is set up with generous permissions for the gpadmin user and no database access for other Greenplum Database roles. You will need to edit the pg_hba.conf file to enable users’ access to databases and to secure the gpadmin user. Consider removing entries that have trust authentication, since they allow anyone with access to the server to connect with any role they choose. For local (UNIX socket) connections, use ident authentication, which requires the operating system user to match the role specified. For local and remote TCP connections, ident authentication requires the client’s host to run an indent service. You could install an ident service on the master host and then use ident authentication for local TCP connections, for example 127.0.0.1/28. Using ident authentication for remote TCP connections is less secure because it requires you to trust the integrity of the ident service on the client’s host.

    This example shows how to edit the pg_hba.conf file of the master to allow remote client access to all databases from all roles using encrypted password authentication.

    To edit pg_hba.conf:

    1. Open the file $MASTER_DATA_DIRECTORY/pg_hba.conf in a text editor.

    2. Add a line to the file for each type of connection you want to allow. Records are read sequentially, so the order of the records is significant. Typically, earlier records will have tight connection match parameters and weaker authentication methods, while later records will have looser match parameters and stronger authentication methods. For example:

      1. # allow the gpadmin user local access to all databases
      2. # using ident authentication
      3. local   all   gpadmin   ident         sameuser
      4. host    all   gpadmin   127.0.0.1/32  ident
      5. host    all   gpadmin   ::1/128       ident
      6. # allow the 'dba' role access to any database from any
      7. # host with IP address 192.168.x.x and use md5 encrypted
      8. # passwords to authenticate the user
      9. # Note that to use SHA-256 encryption, replace md5 with
      10. # password in the line below
      11. host    all   dba   192.168.0.0/32  md5

    The following basic authentication methods are supported:

    Password or MD5

    Requires clients to provide a password, one of either:

    • Md5 – password transmitted as an MD5 hash.
    • Password – A password transmitted in clear text. Always use SSL connections to prevent password sniffing during transit. This is configurable, see “Encrypting Passwords” in the Greenplum Database Administrator Guide for more information.

    Reject

    Reject the connections with the matching parameters. You should typically use this to restrict access from specific hosts or insecure connections.

    Ident

    Authenticates based on the client’s operating system user name. This is secure for local socket connections. Using ident for TCP connections from remote hosts requires that the client’s host is running an ident service. The ident authentication method should only be used with remote hosts on a trusted, closed network.

    Following are some sample pg_hba.conf basic authentication entries:

    1. hostnossl    all   all        0.0.0.0   reject
    2. hostssl      all   testuser   0.0.0.0/0 md5
    3. local        all   gpuser               ident

    Kerberos Authentication

    You can authenticate against a Kerberos server (RFC 2743, 1964).

    The format for Kerberos authentication in the file is:

    1. servicename/hostname@realm

    The following options may be added to the entry:

    Map

    Map system and database users.

    Include_realm

    Option to specify realm name included in the system-user name in the ident map file.

    Krb_realm

    Krb_server_hostname

    The hostname of the service principal.

    Following is an example pg_hba.conf entry for Kerberos:

    1. host    all all 0.0.0.0/0   krb5
    2. hostssl all all 0.0.0.0/0   krb5 map=krbmap

    The following Kerberos server settings are specified in postgresql.conf:

    krb_server_key file

    Sets the location of the Kerberos server key file.

    krb_srvname string

    Kerberos service name.

    krb_caseins_users boolean

    Case-sensitivity. The default is off.

    The following client setting is specified as a connection parameter:

    Krbsrvname

    The Kerberos service name to use for authentication.

    LDAP Authentication

    You can authenticate against an LDAP directory.

    • LDAPS and LDAP over TLS options encrypt the connection to the LDAP server.
    • The connection from the client to the server is not encrypted unless SSL is enabled. Configure client connections to use SSL to encrypt connections from the client.
    • To configure or customize LDAP settings, set the LDAPCONF environment variable with the path to the ldap.conf file and add this to the greenplum_path.sh script.

    Following are the recommended steps for configuring your system for LDAP authentication:

    1. Set up the LDAP server with the database users/roles to be authenticated via LDAP.
    2. On the database:
      1. Verify that the database users to be authenticated via LDAP exist on the database. LDAP is only used for verifying username/password pairs, so the roles should exist in the database.
      2. Update the pg_hba.conf file in the $MASTER_DATA_DIRECTORY to use LDAP as the authentication method for the respective users. Note that the first entry to match the user/role in the pg_hba.conf file will be used as the authentication mechanism, so the position of the entry in the file is important.
      3. Reload the server for the pg_hba.conf configuration settings to take effect (gpstop -u).

    Specify the following parameter auth-options.

    ldapserver

    Names or IP addresses of LDAP servers to connect to. Multiple servers may be specified, separated by spaces.

    ldapprefix

    String to prepend to the user name when forming the DN to bind as, when doing simple bind authentication.

    ldapsuffix

    String to append to the user name when forming the DN to bind as, when doing simple bind authentication.

    ldapport

    Port number on LDAP server to connect to. If no port is specified, the LDAP library’s default port setting will be used.

    ldaptls

    Set to 1 to make the connection between PostgreSQL and the LDAP server use TLS encryption. Note that this only encrypts the traffic to the LDAP server — the connection to the client will still be unencrypted unless SSL is used.

    ldapbasedn

    Root DN to begin the search for the user in, when doing search+bind authentication.

    ldapbinddn

    DN of user to bind to the directory with to perform the search when doing search+bind authentication.

    ldapbindpasswd

    Password for user to bind to the directory with to perform the search when doing search+bind authentication.

    ldapsearchattribute

    Attribute to match against the user name in the search when doing search+bind authentication.

    Example:

    1. ldapserver=ldap.greenplum.com prefix="cn=" suffix=", dc=greenplum, dc=com"

    Following are sample pg_hba.conf file entries for LDAP authentication:

    SSL Client Authentication

    SSL authentication compares the Common Name (cn) attribute of an SSL certificate provided by the connecting client during the SSL handshake to the requested database user name. The database user should exist in the database. A map file can be used for mapping between system and database user names.

    Authentication method:

    Cert

    Authentication options:

    Hostssl - Connection type must be hostssl.

    map=mapping - mapping.

    This is specified in the pg_ident.conf, or in the file specified in the ident_file server setting.

    Following are sample pg_hba.conf entries for SSL client authentication:

    1. Hostssl testdb certuser 192.168.0.0/16 cert
    2. Hostssl testdb all 192.168.0.0/16 cert map=gpuser

    OpenSSL Configuration

    Greenplum Database reads the OpenSSL configuration file specified in $GP_HOME/etc/openssl.cnf by default. You can make changes to the default configuration for OpenSSL by modifying or updating this file and restarting the server.

    Creating a Self-Signed Certificate

    A self-signed certificate can be used for testing, but a certificate signed by a certificate authority (CA) (either one of the global CAs or a local one) should be used in production so that clients can verify the server’s identity. If all the clients are local to the organization, using a local CA is recommended.

    To create a self-signed certificate for the server:

    1. Enter the following openssl command:

      1. openssl req -new -text -out server.req

    2. Enter the requested information at the prompts.

      Make sure you enter the local host name for the Common Name. The challenge password can be left blank.

    3. The program generates a key that is passphrase-protected; it does not accept a passphrase that is less than four characters long. To remove the passphrase (and you must if you want automatic start-up of the server), run the following command:

      1. openssl rsa -in privkey.pem -out server.key
      2. rm privkey.pem

    4. Enter the old passphrase to unlock the existing key. Then run the following command:

      1. openssl req -x509 -in server.req -text -key server.key -out server.crt

      This turns the certificate into a self-signed certificate and copies the key and certificate to where the server will look for them.

    5. Finally, run the following command:

      1. chmod og-rwx server.key

    For more details on how to create your server private key and certificate, refer to the OpenSSL documentation.

    The following Server settings need to be specified in the postgresql.conf configuration file:

    • ssl boolean. Enables SSL connections.
    • ssl_renegotiation_limit integer. Specifies the data limit before key renegotiation.
    • server.crt. Server certificate.
    • server.key. Server private key.
    • root.crt. Trusted certificate authorities.
    • root.crl. Certificates revoked by certificate authorities.

    Configuring the SSL Client Connection

    SSL options:

    sslmode

    Specifies the level of protection.

    • require

      Only use an SSL connection. If a root CA file is present, verify the certificate in the same way as if verify-ca was specified.

      verify-ca

      Only use an SSL connection. Verify that the server certificate is issued by a trusted CA.

      verify-full

      Only use an SSL connection. Verify that the server certificate is issued by a trusted CA and that the server host name matches that in the certificate.

    sslcert

    The file name of the client SSL certificate. The default is ~/.postgresql/postgresql.crt.

    sslkey

    The secret key used for the client certificate. The default is ~/.postgresql/postgresql.key.

    sslrootcert

    The name of a file containing SSL Certificate Authority certificate(s). The default is ~/.postgresql/root.crt.

    sslcrl

    The name of the SSL certificate revocation list. The default is ~/.postgresql/root.crl.

    The client connection parameters can be set using the following environment variables:

    • sslmode – PGSSLMODE
    • sslkey – PGSSLKEY
    • sslrootcert – PGSSLROOTCERT
    • – PGSSLCERT
    • sslcrl – PGSSLCRL

    The “PAM” (Pluggable Authentication Modules) authentication method validates username/password pairs, similar to basic authentication. To use PAM authentication, the user must already exist as a Greenplum Database role name.

    Greenplum uses the pamservice authentication parameter to identify the service from which to obtain the PAM configuration.

    Note: If PAM is set up to read /etc/shadow, authentication will fail because the PostgreSQL server is started by a non-root user. This is not an issue when PAM is configured to use LDAP or another authentication method.

    Greenplum Database does not install a PAM configuration file. If you choose to use PAM authentication with Greenplum, you must identify the PAM service name for Greenplum and create the associated PAM service configuration file and configure Greenplum Database to use PAM authentication as described below:

    1. Log in to the Greenplum Database master host and set up your environment. For example:

      1. $ ssh gpadmin@<gpmaster>
      2. gpadmin@gpmaster$ . /usr/local/greenplum-db/greenplum_path.sh

    2. Identify the pamservice name for Greenplum Database. In this procedure, we choose the name greenplum.

    3. Create the PAM service configuration file, /etc/pam.d/greenplum, and add the text below. You must have operating system superuser privileges to create the /etc/pam.d directory (if necessary) and the greenplum PAM configuration file.

      This configuration instructs PAM to authenticate the local operating system user.

    4. Ensure that the /etc/pam.d/greenplum file is readable by all users:

      1. sudo chmod 644 /etc/pam.d/greenplum

    5. Add one or more entries to the pg_hba.conf configuration file to enable PAM authentication in Greenplum Database. These entries must specify the pam auth-method. You must also specify the pamservice=greenplum auth-option. For example:

      2. host     <user-name>     <db-name>     <address>     pam     pamservice=greenplum

    6. Reload the Greenplum Database configuration:

      1. $ gpstop -u

    Radius Authentication

    RADIUS (Remote Authentication Dial In User Service) authentication works by sending an Access Request message of type ‘Authenticate Only’ to a configured RADIUS server. It includes parameters for user name, password (encrypted), and the Network Access Server (NAS) Identifier. The request is encrypted using the shared secret specified in the radiussecret option. The RADIUS server responds with either Access Accept or Access Reject.

    Note: RADIUS accounting is not supported.

    RADIUS authentication only works if the users already exist in the database.

    The RADIUS encryption vector requires SSL to be enabled in order to be cryptographically strong.

    RADIUS Authentication Options

    radiusserver

    The name of the RADIUS server.

    radiussecret

    The RADIUS shared secret.

    radiusport

    The port to connect to on the RADIUS server.

    radiusidentifier

    NAS identifier in RADIUS requests.

    Following are sample pg_hba.conf entries for RADIUS client authentication:

    1. hostssl  all all 0.0.0.0/0 radius radiusserver=servername radiussecret=<sharedsecret>

    To limit the number of active concurrent sessions to your Greenplum Database system, you can configure the max_connections server configuration parameter. This is a local parameter, meaning that you must set it in the postgresql.conf file of the master, the standby master, and each segment instance (primary and mirror). The value of max_connections on segments must be 5-10 times the value on the master.

    When you set max_connections, you must also set the dependent parameter max_prepared_transactions. This value must be at least as large as the value of max_connections on the master, and segment instances should be set to the same value as the master.

    In $MASTER_DATA_DIRECTORY/postgresql.conf (including standby master):

    1. max_connections=100
    2. max_prepared_transactions=100

    In SEGMENT_DATA_DIRECTORY/postgresql.conf for all segment instances:

    1. max_connections=500
    2. max_prepared_transactions=100

    Note: Raising the values of these parameters may cause Greenplum Database to request more shared memory. To mitigate this effect, consider decreasing other memory-related parameters such as gp_cached_segworkers_threshold.

    To change the number of allowed connections:

    1. Stop your Greenplum Database system:

    2. On the master host, edit $MASTER_DATA_DIRECTORY/postgresql.conf and change the following two parameters:

      • max_connections – the number of active user sessions you want to allow plus the number of superuser_reserved_connections.
      • max_prepared_transactions – must be greater than or equal to max_connections.

    3. On each segment instance, edit SEGMENT_DATA_DIRECTORY/postgresql.conf and change the following two parameters:

      • max_connections – must be 5-10 times the value on the master.
      • max_prepared_transactions – must be equal to the value on the master.

    4. Restart your Greenplum Database system:

      1. $ gpstart

    Encrypting Client/Server Connections

    Greenplum Database has native support for SSL connections between the client and the master server. SSL connections prevent third parties from snooping on the packets, and also prevent man-in-the-middle attacks. SSL should be used whenever the client connection goes through an insecure link, and must be used whenever client certificate authentication is used.

    Note: For information about encrypting data between the gpfdist server and Greenplum Database segment hosts, see Encrypting gpfdist Connections.

    To enable SSL requires that OpenSSL be installed on both the client and the master server systems. Greenplum can be started with SSL enabled by setting the server configuration parameter ssl=on in the master postgresql.conf. When starting in SSL mode, the server will look for the files server.key (server private key) and (server certificate) in the master data directory. These files must be set up correctly before an SSL-enabled Greenplum system can start.

    Important: Do not protect the private key with a passphrase. The server does not prompt for a passphrase for the private key, and the database startup fails with an error if one is required.