我的书签
添加书签
移除书签About disaster recovery
Restoring to a previous cluster state
If applicable, you might also need to .
About disaster recovery
- About
- API reference
- API list
- Editing kubelet log level verbosity and gathering logs
- Authorization APIs
- TokenRequest [authentication.k8s.io/v1]
- SelfSubjectRulesReview [authorization.openshift.io/v1]
- SubjectAccessReview [authorization.k8s.io/v1]
- About Authorization APIs
- LocalResourceAccessReview [authorization.openshift.io/v1]
- SubjectAccessReview [authorization.openshift.io/v1]
- TokenReview [authentication.k8s.io/v1]
- LocalSubjectAccessReview [authorization.openshift.io/v1]
- SelfSubjectRulesReview [authorization.k8s.io/v1]
- LocalSubjectAccessReview [authorization.k8s.io/v1]
- ResourceAccessReview [authorization.openshift.io/v1]
- SelfSubjectAccessReview [authorization.k8s.io/v1]
- SubjectRulesReview [authorization.openshift.io/v1]
- Autoscale APIs
- Common object reference
- Config APIs
- Ingress [config.openshift.io/v1]
- ClusterOperator [config.openshift.io/v1]
- Project [config.openshift.io/v1]
- Build [config.openshift.io/v1]
- Node [config.openshift.io/v1]
- ImageContentPolicy [config.openshift.io/v1]
- OperatorHub [config.openshift.io/v1]
- Console [config.openshift.io/v1]
- FeatureGate [config.openshift.io/v1]
- Proxy [config.openshift.io/v1]
- ClusterVersion [config.openshift.io/v1]
- About Config APIs
- DNS [config.openshift.io/v1]
- APIServer [config.openshift.io/v1]
- ProjectHelmChartRepository [helm.openshift.io/v1beta1]
- OAuth [config.openshift.io/v1]
- Image [config.openshift.io/v1]
- ImageTagMirrorSet [config.openshift.io/v1]
- Scheduler [config.openshift.io/v1]
- Network [config.openshift.io/v1]
- Authentication [config.openshift.io/v1]
- HelmChartRepository [helm.openshift.io/v1beta1]
- ImageDigestMirrorSet [config.openshift.io/v1]
- Infrastructure [config.openshift.io/v1]
- Console APIs
- ConsolePlugin [console.openshift.io/v1]
- ConsoleExternalLogLink [console.openshift.io/v1]
- ConsoleNotification [console.openshift.io/v1]
- ConsoleLink [console.openshift.io/v1]
- ConsoleQuickStart [console.openshift.io/v1]
- ConsoleCLIDownload [console.openshift.io/v1]
- ConsoleYAMLSample [console.openshift.io/v1]
- About Console APIs
- Extension APIs
- Image APIs
- SecretList [image.openshift.io/v1]
- ImageTag [image.openshift.io/v1]
- ImageSignature [image.openshift.io/v1]
- ImageStreamTag [image.openshift.io/v1]
- About Image APIs
- ImageStream [image.openshift.io/v1]
- ImageStreamMapping [image.openshift.io/v1]
- ImageStreamImport [image.openshift.io/v1]
- ImageStreamLayers [image.openshift.io/v1]
- ImageStreamImage [image.openshift.io/v1]
- Image [image.openshift.io/v1]
- Machine APIs
- ControlPlaneMachineSet [machine.openshift.io/v1]
- MachineConfig [machineconfiguration.openshift.io/v1]
- ControllerConfig [machineconfiguration.openshift.io/v1]
- KubeletConfig [machineconfiguration.openshift.io/v1]
- ContainerRuntimeConfig [machineconfiguration.openshift.io/v1]
- MachineHealthCheck [machine.openshift.io/v1beta1]
- MachineSet [machine.openshift.io/v1beta1]
- MachineConfigPool [machineconfiguration.openshift.io/v1]
- Machine [machine.openshift.io/v1beta1]
- About Machine APIs
- Metadata APIs
- Monitoring APIs
- ThanosRuler [monitoring.coreos.com/v1]
- ServiceMonitor [monitoring.coreos.com/v1]
- PodMonitor [monitoring.coreos.com/v1]
- Alertmanager [monitoring.coreos.com/v1]
- PrometheusRule [monitoring.coreos.com/v1]
- Probe [monitoring.coreos.com/v1]
- AlertmanagerConfig [monitoring.coreos.com/v1beta1]
- Prometheus [monitoring.coreos.com/v1]
- About Monitoring APIs
- Network APIs
- EgressQoS [k8s.ovn.org/v1]
- CloudPrivateIPConfig [cloud.network.openshift.io/v1]
- IPPool [whereabouts.cni.cncf.io/v1alpha1]
- NetworkPolicy [networking.k8s.io/v1]
- PodNetworkConnectivityCheck [controlplane.operator.openshift.io/v1alpha1]
- EgressRouter [network.operator.openshift.io/v1]
- About Network APIs
- EgressFirewall [k8s.ovn.org/v1]
- NetworkAttachmentDefinition [k8s.cni.cncf.io/v1]
- OverlappingRangeIPReservation [whereabouts.cni.cncf.io/v1alpha1]
- Ingress [networking.k8s.io/v1]
- Service [undefined/v1]
- Endpoints [undefined/v1]
- Route [route.openshift.io/v1]
- EgressIP [k8s.ovn.org/v1]
- EndpointSlice [discovery.k8s.io/v1]
- IngressClass [networking.k8s.io/v1]
- Node APIs
- OAuth APIs
- Operator APIs
- KubeScheduler [operator.openshift.io/v1]
- Config [imageregistry.operator.openshift.io/v1]
- CSISnapshotController [operator.openshift.io/v1]
- Network [operator.openshift.io/v1]
- CloudCredential [operator.openshift.io/v1]
- KubeControllerManager [operator.openshift.io/v1]
- DNSRecord [ingress.operator.openshift.io/v1]
- Config [operator.openshift.io/v1]
- ImagePruner [imageregistry.operator.openshift.io/v1]
- ImageContentSourcePolicy [operator.openshift.io/v1alpha1]
- OpenShiftControllerManager [operator.openshift.io/v1]
- ClusterCSIDriver [operator.openshift.io/v1]
- Config [samples.operator.openshift.io/v1]
- OperatorPKI [network.operator.openshift.io/v1]
- KubeAPIServer [operator.openshift.io/v1]
- OpenShiftAPIServer [operator.openshift.io/v1]
- Storage [operator.openshift.io/v1]
- Authentication [operator.openshift.io/v1]
- ServiceCA [operator.openshift.io/v1]
- InsightsOperator [operator.openshift.io/v1]
- Etcd [operator.openshift.io/v1]
- IngressController [operator.openshift.io/v1]
- Console [operator.openshift.io/v1]
- KubeStorageVersionMigrator [operator.openshift.io/v1]
- About Operator APIs
- DNS [operator.openshift.io/v1]
- OperatorHub APIs
- CatalogSource [operators.coreos.com/v1alpha1]
- InstallPlan [operators.coreos.com/v1alpha1]
- Subscription [operators.coreos.com/v1alpha1]
- PackageManifest [packages.operators.coreos.com/v1]
- OperatorCondition [operators.coreos.com/v2]
- OperatorGroup [operators.coreos.com/v1]
- OLMConfig [operators.coreos.com/v1]
- Operator [operators.coreos.com/v1]
- ClusterServiceVersion [operators.coreos.com/v1alpha1]
- About OperatorHub APIs
- Policy APIs
- Project APIs
- Provisioning APIs
- Metal3Remediation [infrastructure.cluster.x-k8s.io/v1beta1]
- HostFirmwareSettings [metal3.io/v1alpha1]
- BMCEventSubscription [metal3.io/v1alpha1]
- Metal3RemediationTemplate [infrastructure.cluster.x-k8s.io/v1beta1]
- About Provisioning APIs
- BareMetalHost [metal3.io/v1alpha1]
- PreprovisioningImage [metal3.io/v1alpha1]
- Provisioning [metal3.io/v1alpha1]
- FirmwareSchema [metal3.io/v1alpha1]
- HardwareData [metal3.io/v1alpha1]
- RBAC APIs
- Role APIs
- Schedule and quota APIs
- FlowSchema [flowcontrol.apiserver.k8s.io/v1beta1]
- LimitRange [undefined/v1]
- AppliedClusterResourceQuota [quota.openshift.io/v1]
- PriorityClass [scheduling.k8s.io/v1]
- ResourceQuota [undefined/v1]
- PriorityLevelConfiguration [flowcontrol.apiserver.k8s.io/v1beta1]
- ClusterResourceQuota [quota.openshift.io/v1]
- About Schedule and quota APIs
- Security APIs
- CertificateSigningRequest [certificates.k8s.io/v1]
- PodSecurityPolicySelfSubjectReview [security.openshift.io/v1]
- SecurityContextConstraints [security.openshift.io/v1]
- CredentialsRequest [cloudcredential.openshift.io/v1]
- About Security APIs
- RangeAllocation [security.openshift.io/v1]
- PodSecurityPolicyReview [security.openshift.io/v1]
- Secret [undefined/v1]
- ServiceAccount [undefined/v1]
- PodSecurityPolicySubjectReview [security.openshift.io/v1]
- Storage APIs
- CSIStorageCapacity [storage.k8s.io/v1]
- VolumeSnapshotClass [snapshot.storage.k8s.io/v1]
- StorageState [migration.k8s.io/v1alpha1]
- StorageClass [storage.k8s.io/v1]
- CSIDriver [storage.k8s.io/v1]
- About Storage APIs
- VolumeAttachment [storage.k8s.io/v1]
- VolumeSnapshotContent [snapshot.storage.k8s.io/v1]
- VolumeSnapshot [snapshot.storage.k8s.io/v1]
- PersistentVolume [undefined/v1]
- CSINode [storage.k8s.io/v1]
- StorageVersionMigration [migration.k8s.io/v1alpha1]
- PersistentVolumeClaim [undefined/v1]
- Template APIs
- User and group APIs
- Workloads APIs
- StatefulSet [apps/v1]
- DeploymentLog [apps.openshift.io/v1]
- BuildRequest [build.openshift.io/v1]
- Job [batch/v1]
- Build [build.openshift.io/v1]
- DeploymentConfigRollback [apps.openshift.io/v1]
- DeploymentConfig [apps.openshift.io/v1]
- About Workloads APIs
- ReplicaSet [apps/v1]
- ReplicationController [undefined/v1]
- DeploymentRequest [apps.openshift.io/v1]
- CronJob [batch/v1]
- Deployment [apps/v1]
- DaemonSet [apps/v1]
- Pod [undefined/v1]
- BuildLog [build.openshift.io/v1]
- BuildConfig [build.openshift.io/v1]
- API compatibility guidelines
- Understanding API tiers
- Architecture
- Authentication and authorization
- Syncing LDAP groups
- Configuring OAuth clients
- Understanding and creating service accounts
- Using a service account as an OAuth client
- Authentication and authorization overview
- Using service accounts in applications
- Removing the kubeadmin user
- Configuring the internal OAuth server
- Using RBAC to define and apply permissions
- Managing user-owned OAuth access tokens
- Using bound service account tokens
- Understanding authentication
- Managing security context constraints
- Impersonating the system:admin user
- Managing cloud provider credentials
- Scoping tokens
- Understanding and managing pod security admission
- Understanding identity provider configuration
- Configuring identity providers
- Configuring an LDAP identity provider
- Configuring a GitLab identity provider
- Configuring an OpenID Connect identity provider
- Configuring an htpasswd identity provider
- Configuring a Google identity provider
- Configuring a Keystone identity provider
- Configuring a GitHub or GitHub Enterprise identity provider
- Configuring a basic authentication identity provider
- Configuring a request header identity provider
- Backup and restore
- Overview of backup and restore operations
- Shutting down a cluster gracefully
- Application backup and restore
- Control plane backup and restore
- Restarting a cluster gracefully
- Building applications
- Deleting applications
- Viewing application composition using the Topology view
- Editing applications
- Monitoring project and application metrics using the Developer perspective
- Pruning objects to reclaim resources
- Exporting applications
- Monitoring application health
- Building applications overview
- Creating applications
- Deployments
- Projects
- Quotas
- Working with Helm charts
- Idling applications
- Using config maps with applications
- Using the Red Hat Marketplace
- Connecting applications to services
- Exposing binding data from a service
- Binding workloads using Service Binding Operator
- Connecting an application to a service using the Developer perspective
- Understanding Service Binding Operator
- Getting started with service binding on IBM Power, IBM zSystems, and IBM LinuxONE
- Getting started with service binding
- Installing Service Binding Operator
- Projecting binding data
- Service Binding Operator release notes
- CI/CD
- Builds
- Understanding image builds
- Build configuration resources
- Triggering and modifying builds
- Using build strategies
- Creating build inputs
- Understanding build configurations
- Managing build output
- Performing advanced builds
- Troubleshooting builds
- Custom image builds with Buildah
- Performing and configuring basic builds
- Setting up additional trusted certificate authorities for builds
- Securing builds by strategy
- Using Red Hat subscriptions in builds
- CI/CD overview
- Builds
- CLI tools
- Hosted control planes
- Images
- Using the Cluster Samples Operator with an alternate registry
- Creating images
- Image configuration resources
- Configuring the Cluster Samples Operator
- Using templates
- Managing image streams
- Triggering updates on image stream changes
- Using Ruby on Rails
- Using image streams with Kubernetes resources
- Overview of images
- Managing images
- Using images
- Installing
- Installation overview
- Cluster capabilities
- Selecting an installation method and preparing a cluster
- Validating an installation
- Troubleshooting installation issues
- Disconnected installation mirroring
- Installation configuration
- Installing on Alibaba
- Installing a cluster on Alibaba Cloud into an existing VPC
- Installing a cluster on Alibaba Cloud with network customizations
- Uninstalling a cluster on Alibaba Cloud
- Creating the required Alibaba Cloud resources
- Installing a cluster on Alibaba Cloud with customizations
- Preparing to install on Alibaba Cloud
- Installing a cluster quickly on Alibaba Cloud
- Installing on any platform
- Installing on AWS
- Installing a cluster on AWS with remote workers on AWS Outposts
- Installing a cluster on AWS into an existing VPC
- Installing a cluster on AWS in a restricted network
- Installing a cluster on AWS using CloudFormation templates
- Installing a cluster on AWS with customizations
- Installing a cluster on AWS with network customizations
- Installing a cluster on AWS into a China region
- Installing a cluster quickly on AWS
- Manually creating IAM
- Installing a three-node cluster on AWS
- Installing a cluster using AWS Local Zones
- Expanding a cluster with on-premise bare metal nodes
- Uninstalling a cluster on AWS
- Installing a private cluster on AWS
- Preparing to install on AWS
- Configuring an AWS account
- Installing a cluster on AWS into a government region
- Installing a cluster on AWS in a restricted network with user-provisioned infrastructure
- Installing a cluster on AWS into a Secret or Top Secret Region
- Installing on Azure
- Installing a three-node cluster on Azure
- Enabling user-managed encryption on Azure
- Configuring an Azure account
- Uninstalling a cluster on Azure
- Preparing to install on Azure
- Installing a cluster on Azure with customizations
- Installing a cluster on Azure using ARM templates
- Installing a cluster on Azure with network customizations
- Installing a cluster on Azure into a government region
- Installing a cluster on Azure into an existing VNet
- Installing a private cluster on Azure
- Manually creating IAM
- Installing a cluster quickly on Azure
- Installing on Azure Stack Hub
- Installing a cluster on Azure Stack Hub using ARM templates
- Uninstalling a cluster on Azure Stack Hub
- Installing a cluster on Azure Stack Hub with an installer-provisioned infrastructure
- Installing a cluster on Azure Stack Hub with network customizations
- Configuring an Azure Stack Hub account
- Preparing to install on Azure Stack Hub
- Installing on bare metal
- Installing a user-provisioned bare metal cluster with network customizations
- Preparing to install on bare metal
- Installing a user-provisioned bare metal cluster on a restricted network
- Installing a user-provisioned cluster on bare metal
- Scaling a user-provisioned installation with the bare metal operator
- Installing on GCP
- Uninstalling a cluster on GCP
- Manually creating IAM
- Preparing to install on GCP
- Installing a cluster on GCP with network customizations
- Installing a cluster on GCP into a shared VPC
- Installing a cluster on GCP into an existing VPC
- Installing a cluster on GCP in a restricted network
- Installing a cluster on GCP in a restricted network with user-provisioned infrastructure
- Installing a private cluster on GCP
- Installing a cluster into a shared VPC on GCP using Deployment Manager templates
- Installing a cluster on GCP with customizations
- Installing a cluster quickly on GCP
- Installing a three-node cluster on GCP
- Configuring a GCP project
- Installing a cluster on GCP using Deployment Manager templates
- Installing on IBM Cloud VPC
- Preparing to install on IBM Cloud VPC
- Uninstalling a cluster on IBM Cloud VPC
- Configuring an IBM Cloud account
- Installing a private cluster on IBM Cloud VPC
- Configuring IAM for IBM Cloud VPC
- Installing a cluster on IBM Cloud VPC with network customizations
- Installing a cluster on IBM Cloud VPC into an existing VPC
- Installing a cluster on IBM Cloud VPC with customizations
- Installing on Nutanix
- Installing on OpenStack
- Installing a cluster on OpenStack on your own infrastructure
- Installing a cluster on OpenStack with customizations
- Uninstalling a cluster on OpenStack from your own infrastructure
- Installing a cluster on OpenStack with Kuryr on your own infrastructure
- OpenStack Cloud Controller Manager reference guide
- Installing a cluster on OpenStack with Kuryr
- Preparing to install a cluster that uses SR-IOV or OVS-DPDK on OpenStack
- Installing a cluster on OpenStack in a restricted network
- Preparing to install on OpenStack
- Uninstalling a cluster on OpenStack
- Installing on oVirt
- Installing on VMC
- Installing a cluster on VMC with user-provisioned infrastructure
- Uninstalling a cluster on VMC
- Installing a cluster on VMC with network customizations
- Installing a cluster on VMC
- Installing a cluster on VMC in a restricted network
- Preparing to install on VMC
- Installing a cluster on VMC in a restricted network with user-provisioned infrastructure
- Installing a three-node cluster on VMC
- Installing a cluster on VMC with customizations
- Installing a cluster on VMC with user-provisioned infrastructure and network customizations
- Installing on vSphere
- Installing a cluster on vSphere with user-provisioned infrastructure
- Configuring the vSphere connection settings after an installation
- Installing a cluster on vSphere in a restricted network
- Uninstalling a cluster on vSphere that uses installer-provisioned infrastructure
- Installing a cluster on vSphere with user-provisioned infrastructure and network customizations
- Installing a cluster on vSphere in a restricted network with user-provisioned infrastructure
- Using the vSphere Problem Detector Operator
- Installing a cluster on vSphere with customizations
- Installing a three-node cluster on vSphere
- Installing a cluster on vSphere
- Preparing to install on vSphere
- Installing a cluster on vSphere with network customizations
- Installing bare metal clusters on IBM Cloud
- Deploying installer-provisioned clusters on bare metal
- Logging
- Installing Logging
- Uninstalling Logging
- Viewing logs for a specific resource
- About Logging
- Logging with the LokiStack
- Viewing cluster logs in Kibana
- Updating Logging
- Exported fields
- Enabling JSON logging
- Collecting and storing Kubernetes events
- Release notes
- Forwarding logs to third party systems
- Viewing cluster dashboards
- Configuring your Logging deployment
- Configuring the log visualizer
- Using tolerations to control Logging pod placement
- Configuring the log store
- About the Cluster Logging custom resource
- Configuring CPU and memory limits for Logging components
- Moving the Logging resources with node selectors
- Configuring Logging storage
- Configuring systemd-journald for Logging
- Maintenance and support
- Configuring the logging collector
- Logging 5.5
- Logging 5.6
- Logging 5.7
- Troubleshooting Logging
- Machine management
- Managing user-provisioned infrastructure manually
- Applying autoscaling to a cluster
- Deleting a machine
- Creating infrastructure machine sets
- Overview of machine management
- Deploying machine health checks
- Modifying a compute machine set
- Managing machines with the Cluster API
- Manually scaling a compute machine set
- Managing compute machines with the Machine API
- Creating a compute machine set on AWS
- Creating a compute machine set on Nutanix
- Creating a compute machine set on OpenStack
- Creating a compute machine set on bare metal
- Creating a compute machine set on GCP
- Creating a compute machine set on Azure Stack Hub
- Creating a compute machine set on IBM Cloud
- Creating a compute machine set on Azure
- Creating a compute machine set on IBM Power Virtual Server
- Creating a compute machine set on Alibaba Cloud
- Creating a compute machine set on oVirt
- Creating a compute machine set on vSphere
- Managing control plane machines
- Migrating from version 3 to 4
- Migration Toolkit for Containers
- Monitoring
- Troubleshooting monitoring issues
- Accessing third-party monitoring APIs
- Querying metrics
- Enabling monitoring for user-defined projects
- Monitoring bare-metal events
- Managing alerts
- The NVIDIA GPU administration dashboard
- Configuring the monitoring stack
- Managing metrics targets
- Config map reference for the Cluster Monitoring Operator
- Enabling alert routing for user-defined projects
- Reviewing monitoring dashboards
- Managing metrics
- Monitoring overview
- Networking
- Configuring IP failover
- Networking Operators overview
- Accessing hosts
- Developing PTP events consumer applications
- Configuring the node port service range
- Understanding networking
- Ingress sharding
- Verifying connectivity to an endpoint
- Associating secondary interfaces metrics to network attachments
- Configuring the cluster-wide proxy
- Configuring a custom PKI
- Using SCTP
- Changing the cluster network MTU
- Configuring the Ingress Controller endpoint publishing strategy
- Understanding the Ingress Node Firewall Operator
- Configuring the cluster network IP address range
- Using PTP hardware
- Configuring interface-level network sysctls
- Understanding the DNS Operator
- Configuring the Ingress Controller for manual DNS management
- Load balancing on OpenStack
- Understanding the Ingress Operator
- About networking
- Understanding the Cluster Network Operator
- AWS Load Balancer Operator
- Installing the AWS Load Balancer Operator on Security Token Service cluster
- Creating an instance of the AWS Load Balancer Controller
- Installing the AWS Load Balancer Operator
- Configuring cluster-wide proxy on the AWS Load Balancer Operator
- Serving Multiple Ingresses through a single AWS Load Balancer
- Adding TLS termination on the AWS Load Balancer
- AWS Load Balancer Operator release notes
- Understanding the AWS Load Balancer Operator
- Configuring ingress cluster traffic
- Configuring ingress cluster traffic using a load balancer
- Overview
- Configuring ingress cluster traffic using load balancer allowed source ranges
- Configuring ingress cluster traffic using an Ingress Controller
- Configuring ingress cluster traffic using a NodePort
- Configuring ingress cluster traffic on AWS
- Configuring ingress cluster traffic using a service external IP
- Configuring ExternalIPs for services
- Configuring Routes
- External DNS Operator
- Creating DNS records on a public DNS zone for Infoblox
- Creating DNS records on an public zone for Azure
- External DNS Operator configuration parameters
- Configuring the cluster-wide proxy on the External DNS Operator
- Creating DNS records on an public hosted zone for AWS
- Creating DNS records on an public managed zone for GCP
- Understanding the External DNS Operator
- Installing the External DNS Operator
- Hardware networks
- Configuring hardware offloading
- About Single Root I/O Virtualization (SR-IOV) hardware networks
- Adding a pod to an SR-IOV network
- Tuning sysctl settings on an SR-IOV network
- Using pod-level bonding for secondary networks
- Configuring an SR-IOV Ethernet network attachment
- Uninstalling the SR-IOV Operator
- Using DPDK and RDMA
- Installing the SR-IOV Operator
- Configuring an SR-IOV network device
- Switching Bluefield-2 from NIC to DPU mode
- Configuring an SR-IOV InfiniBand network attachment
- Configuring the SR-IOV Operator
- Using high performance multicast
- Kubernetes NMState
- Load balancing with MetalLB
- Configuring MetalLB BFD profiles
- Configuring MetalLB address pools
- Upgrading the MetalLB Operator
- MetalLB logging, troubleshooting, and support
- Installing the MetalLB Operator
- Advertising the IP address pools
- Configuring MetalLB BGP peers
- About MetalLB and the MetalLB Operator
- Configuring services to use MetalLB
- Advertising an IP address pool using the community alias
- Multiple networks
- Removing an additional network
- Understanding multiple networks
- Attaching a pod to an additional network
- Assigning a secondary network to a VRF
- Configuring an additional network
- Editing an additional network
- Removing a pod from an additional network
- Configuring multi-network policy
- About virtual routing and forwarding
- Network Observability
- Troubleshooting Network Observability
- Understanding Network Observability Operator
- Installing the Network Observability Operator
- Monitoring the Network Observability Operator
- API reference
- JSON flows format reference
- Observing the network traffic
- Configuring the Network Observability Operator
- Network Observability overview
- Network Observability release notes
- Network policy
- OpenShift SDN network plugin
- Considerations for the use of an egress router pod
- Configuring egress IPs for a project
- Deploying an egress router pod in redirect mode
- Configuring an egress firewall for a project
- Enabling multicast for a project
- Removing an egress firewall from a project
- Deploying an egress router pod in HTTP proxy mode
- Editing an egress firewall for a project
- Deploying an egress router pod in DNS proxy mode
- About the OpenShift SDN network plugin
- Migrating to the OpenShift SDN network plugin
- Configuring an egress router pod destination list from a config map
- Viewing an egress firewall for a project
- Rolling back to the OpenShift SDN network plugin
- Disabling multicast for a project
- Configuring kube-proxy
- Configuring multitenant isolation
- OVN-Kubernetes network plugin
- Tracking network flows
- Configuring an egress IP address
- OVN-Kubernetes architecture
- Enabling multicast for a project
- Configuring hybrid networking
- Converting to IPv4/IPv6 dual stack networking
- Migrating from Kuryr
- OVN-Kubernetes troubleshooting
- OVN-Kubernetes traffic tracing
- Logging for egress firewall and network policy rules
- Assigning an egress IP address
- About the OVN-Kubernetes network plugin
- Configuring IPsec encryption
- Viewing an egress firewall for a project
- Editing an egress firewall for a project
- Removing an egress firewall from a project
- Migrating from the OpenShift SDN network plugin
- Deploying an egress router pod in redirect mode
- Disabling multicast for a project
- Configuring an egress firewall for a project
- Considerations for the use of an egress router pod
- Rolling back to the OpenShift SDN network plugin
- Nodes
- Controlling pod placement onto nodes (scheduling)
- Placing pods relative to other pods using pod affinity and anti-affinity rules
- Scheduling pods using a scheduler profile
- Placing pods onto overcommited nodes
- Controlling pod placement on nodes using node affinity rules
- About pod placement using the scheduler
- Evicting pods using the descheduler
- Placing pods on specific nodes using node selectors
- Controlling pod placement using pod topology spread constraints
- Controlling pod placement using node taints
- Overview of nodes
- Using Jobs and DaemonSets
- Working with clusters
- Configuring cluster memory to meet container memory and risk requirements
- Configuring your cluster to place pods on overcommited nodes
- Improving cluster stability in high latency environments using worker latency profiles
- Setting limit ranges
- Viewing system event information in a cluster
- Analyzing cluster resource levels
- Configuring the Linux cgroup version on your nodes
- Enabling features using FeatureGates
- Working with containers
- Understanding containers
- Allowing containers to consume API objects
- Using volumes to persist container data
- Using Init Containers to perform tasks before a pod is deployed
- Copying files to or from a container
- Using port forwarding to access applications in a container
- Executing remote commands in a container
- Mapping volumes using projected volumes
- Using sysctls in containers
- Working with nodes
- Allocating resources for nodes
- Allocating specific CPUs for nodes in a cluster
- Remediating, fencing, and maintaining nodes
- Managing the maximum number of pods per node
- Working with nodes
- Creating infrastructure nodes
- Managing graceful node shutdown
- Managing nodes
- Configuring the TLS security profile for the kubelet
- Freeing node resources using garbage collection
- Using the Node Tuning Operator
- Understanding node rebooting
- Viewing and listing the nodes in your cluster
- Machine Config Daemon metrics
- Working with pods
- Automatically scaling pods with the custom metrics autoscaler
- Providing sensitive data to pods
- Automatically adjust pod resource levels with the vertical pod autoscaler
- Including pod priority in pod scheduling decisions
- Placing pods on specific nodes using node selectors
- Configuring a cluster for pods
- Viewing pods
- Automatically scaling pods with the horizontal pod autoscaler
- Using Device Manager to make devices available to nodes
- About pods
- Creating and using config maps
- Controlling pod placement onto nodes (scheduling)
- Operators
- Operators overview
- Cluster Operators reference
- Administrator tasks
- Managing Operator conditions
- Adding Operators to a cluster
- Configuring OLM features
- Managing platform Operators
- Managing custom catalogs
- Catalog source pod scheduling
- Allowing non-cluster administrators to install Operators
- Deleting Operators from a cluster
- Using OLM on restricted networks
- Configuring proxy support
- Viewing Operator status
- Updating installed Operators
- Developing Operators
- Configuring built-in monitoring with Prometheus
- Defining cluster service versions (CSVs)
- Installing the Operator SDK CLI
- About the Operator SDK
- Working with bundle images
- High-availability or single-node cluster detection and support
- Migrating package manifest projects to bundle format
- Migrating to Operator SDK v0.1.0
- Validating Operator bundles
- Operator SDK CLI reference
- Validating Operators using the scorecard
- Complying with pod security admission
- Configuring leader election
- Helm-based Operators
- Java-based Operators
- Object pruning utility
- Go-based Operators
- Ansible-based Operators
- Understanding Operators
- User tasks
- Post-installation configuration
- Preparing for users
- Configuring alert notifications
- Network configuration
- Machine configuration tasks
- Storage configuration
- Configuring additional devices in an IBM zSystems or IBM LinuxONE environment
- Fedora CoreOS (FCOS) image layering
- Regions and zones for a VMware vCenter
- Cluster tasks
- Enabling encryption on a vSphere cluster
- Configuring a private cluster
- Bare metal configuration
- Node tasks
- Configuring multi-architecture compute machines on an OpenShift cluster
- Converting a connected cluster to a disconnected cluster
- Enabling cluster capabilities
- Registry
- Exposing the registry
- Image Registry Operator in OKD
- Registry overview
- Accessing the registry
- Setting up and configuring the registry
- Configuring the registry for vSphere
- Configuring the registry for GCP user-provisioned infrastructure
- Configuring the registry for OpenStack
- Configuring the registry for AWS user-provisioned infrastructure
- Configuring the registry for OpenStack user-provisioned infrastructure
- Configuring the registry for bare metal
- Configuring the registry for Azure user-provisioned infrastructure
- Configuring the registry for OpenShift Data Foundation
- Scalability and performance
- Using CPU Manager and Topology Manager
- Improving cluster stability in high latency environments using worker latency profiles
- Planning your environment according to object maximums
- Low latency tuning
- Workload partitioning
- Requesting CRI-O and Kubelet profiling data by using the Node Observability Operator
- Performing latency tests for platform verification
- Topology Aware Lifecycle Manager for cluster updates
- Creating a performance profile
- Using the Node Tuning Operator
- Managing bare metal hosts
- Scheduling NUMA-aware workloads
- What huge pages do and how they are consumed by apps
- Recommended performance and scalability practices
- Clusters at the network far edge
- Challenges of the network far edge
- Validating cluster tuning for vDU application workloads
- Recommended single-node OpenShift cluster configuration for vDU application workloads
- Updating managed clusters with the Topology Aware Lifecycle Manager
- Preparing the hub cluster for ZTP
- Advanced managed cluster configuration with PolicyGenTemplate resources
- Installing managed clusters with RHACM and SiteConfig resources
- Updating GitOps ZTP
- Advanced managed cluster configuration with SiteConfig resources
- Manually installing a single-node OpenShift cluster with ZTP
- Configuring managed clusters with policies and PolicyGenTemplate resources
- Expanding single-node OpenShift clusters with GitOps ZTP
- Pre-caching images for single-node OpenShift deployments
- Scalability and performance optimization
- Security and compliance
- Allowing JavaScript-based access to the API server from additional hosts
- Security and compliance overview
- Configuring the audit log policy
- Configuring TLS security profiles
- Viewing audit logs
- Scanning pods for vulnerabilities
- Configuring seccomp profiles
- Network-Bound Disk Encryption (NBDE)
- Encrypting etcd data
- Compliance Operator
- Understanding the Compliance Operator
- Troubleshooting the Compliance Operator
- Managing Compliance Operator remediation
- Retrieving Compliance Operator raw results
- Supported compliance profiles
- Compliance Operator release notes
- Tailoring the Compliance Operator
- Performing advanced Compliance Operator tasks
- Uninstalling the Compliance Operator
- Understanding the Custom Resource Definitions
- Compliance Operator scans
- Updating the Compliance Operator
- Using the oc-compliance plugin
- Installing the Compliance Operator
- Managing the Compliance Operator
- Configuring certificates
- Container security
- Securing the build process
- Hardening Fedora CoreOS
- Understanding container security
- Container image signatures
- Securing container content
- Securing attached storage
- Understanding compliance
- Securing the container platform
- Using container registries securely
- Deploying containers
- Understanding host and VM security
- Securing networks
- Monitoring cluster events and logs
- File Integrity Operator
- Security Profiles Operator
- Security Profiles Operator release notes
- Managing seccomp profiles
- Managing SELinux profiles
- Uninstalling the Security Profiles Operator
- Advanced Security Profiles Operator tasks
- Security Profiles Operator overview
- Understanding the Security Profiles Operator
- Enabling the Security Profiles Operator
- Troubleshooting the Security Profiles Operator
- Certificate types and descriptions
- etcd certificates
- Monitoring and cluster logging Operator component certificates
- OLM certificates
- Proxy certificates
- Control plane certificates
- Node certificates
- Service CA certificates
- Aggregated API client certificates
- Bootstrap certificates
- User-provided certificates for the API server
- User-provided certificates for default ingress
- Machine Config Operator certificates
- Ingress certificates
- Specialized hardware and driver enablement
- Storage
- Storage overview
- Dynamic provisioning
- Understanding ephemeral storage
- Understanding persistent storage
- Expanding persistent volumes
- Generic ephemeral volumes
- Configuring persistent storage
- Persistent storage using AWS Elastic Block Store
- Persistent storage using Fibre Channel
- Persistent storage using VMware vSphere
- Persistent storage using Cinder
- Persistent storage using GCE Persistent Disk
- Persistent storage using FlexVolume
- Persistent storage using Azure Disk
- Persistent storage using NFS
- Persistent storage using Azure File
- Persistent storage using Red Hat OpenShift Data Foundation
- Persistent Storage using iSCSI
- Persistent storage using local storage
- Using Container Storage Interface (CSI)
- Red Hat Virtualization CSI Driver Operator
- OpenStack Cinder CSI Driver Operator
- AWS Elastic Block Store CSI Driver Operator
- VMware vSphere CSI Driver Operator
- AliCloud Disk CSI Driver Operator
- CSI volume snapshots
- IBM VPC Block CSI Driver Operator
- Azure File CSI Driver Operator
- Azure Disk CSI Driver Operator
- AWS Elastic File Service CSI Driver Operator
- CSI inline ephemeral volumes
- CSI automatic migration
- GCP Filestore CSI Driver Operator
- CSI volume cloning
- GCP PD CSI Driver Operator
- Shared Resource CSI Driver Operator
- Azure Stack Hub CSI Driver Operator
- IBM Power Virtual Server Block CSI Driver Operator
- Configuring CSI volumes
- OpenStack Manila CSI Driver Operator
- Detach CSI volumes after non-graceful node shutdown
- Managing the default storage class
- Support
- Getting support
- Gathering data about your cluster
- Support overview
- Managing your cluster resources
- Summarizing cluster specifications
- Remote health monitoring with connected clusters
- Using Insights Operator
- Using remote health reporting in a restricted network
- Opting out of remote health reporting
- Enabling remote health reporting
- Showing data collected by remote health monitoring
- About remote health monitoring
- Using Insights to identify issues with your cluster
- Importing simple content access entitlements with Insights Operator
- Troubleshooting
- Troubleshooting storage issues
- Troubleshooting Windows container workload issues
- Troubleshooting Operator issues
- Troubleshooting CRI-O container runtime issues
- Diagnosing OpenShift CLI (oc) issues
- Troubleshooting installations
- Troubleshooting operating system issues
- Troubleshooting the Source-to-Image process
- Investigating pod issues
- Troubleshooting network issues
- Investigating monitoring issues
- Verifying node health
- Updating clusters
- Migrating to a cluster with multi-architecture compute machines
- Preflight validation for Kernel Module Management (KMM) Modules
- Updating a cluster using the web console
- Updating hardware on nodes running on vSphere
- Updating clusters overview
- Preparing to update a cluster with manually maintained credentials
- Understanding OpenShift update duration
- Updating a cluster using the CLI
- Preparing to update to OKD 4.13
- Performing update using canary rollout strategy
- Updating hosted control planes
- Updating a cluster in a disconnected environment
- Virtualization
- Using the CLI tools
- About OKD Virtualization
- Updating OKD Virtualization
- Getting started with OKD Virtualization
- Security policies
- Backup and restore
- Installing
- Live migration
- Live migration limits and timeouts
- Virtual machine live migration
- Migrating a virtual machine over a dedicated additional network
- Configuring virtual machine eviction strategy
- Cancelling the live migration of a virtual machine instance
- Configuring live migration policies
- Migrating a virtual machine instance to another node
- Node maintenance
- Support
- Virtual machines
- Editing virtual machines
- Managing virtual machines with OpenShift Pipelines
- Automating Windows installation with sysprep
- Controlling virtual machine states
- Viewing the QEMU guest agent information for virtual machines
- Accessing virtual machine consoles
- Using virtual Trusted Platform Module devices
- Installing the QEMU guest agent and VirtIO drivers
- Editing boot order
- Creating virtual machines
- Triggering virtual machine failover by resolving a failed node
- Deleting virtual machines
- Managing virtual machine instances
- Exporting virtual machines
- Advanced virtual machine management
- UEFI mode for virtual machines
- Automatic importing and updating of pre-defined boot sources
- Specifying nodes for virtual machines
- Configuring PCI passthrough
- Scheduling virtual machines
- Configuring certificate rotation
- Using huge pages with virtual machines
- Working with resource quotas for virtual machines
- Configuring mediated devices
- Enabling dedicated resources for a virtual machine
- Configuring PXE booting for virtual machines
- Enabling descheduler evictions on virtual machines
- Configuring vGPU passthrough
- Cloning virtual machines
- Virtual machine disks
- Configuring local storage for virtual machines
- Uploading local disk images by using the virtctl tool
- Expanding virtual storage by adding blank disk images
- Re-using statically provisioned persistent volumes
- Moving a local virtual machine disk to a different node
- Managing data volume annotations
- Uploading local disk images by using the web console
- Uploading a local disk image to a block storage persistent volume claim
- Cloning a data volume using smart-cloning
- Hot plugging virtual disks
- Reserving PVC space for file system overhead
- Managing virtual machine snapshots
- Using container disks with virtual machines
- Expanding a virtual machine disk
- Using preallocation for data volumes
- Configuring CDI to work with namespaces that have a compute resource quota
- Creating and using boot sources
- Preparing CDI scratch space
- Creating data volumes
- Importing virtual machines
- Virtual machine networking
- Connecting a virtual machine to a service mesh
- Configuring IP addresses for virtual machines
- Connecting a virtual machine to an SR-IOV network
- Connecting a virtual machine to a Linux bridge network
- Viewing the IP address of NICs on a virtual machine
- Configuring a virtual machine for the default pod network with OKD Virtualization
- Accessing a virtual machine on a secondary network by using the cluster domain name
- Creating a service to expose a virtual machine
- Using a MAC address pool for virtual machines
- Virtual machine templates
- Web console
- What’s new?
- Windows Container Support for OpenShift
- Understanding Windows container workloads
- Windows node upgrades
- Scheduling Windows container workloads
- Red Hat OpenShift support for Windows Containers release notes
- Using Bring-Your-Own-Host Windows instances as nodes
- Removing Windows nodes
- Enabling Windows container workloads
- Disabling Windows container workloads
- Red Hat OpenShift support for Windows Containers overview
- Creating Windows MachineSet objects
暂无相关搜索结果！
本文档使用 全库网 构建
