我的书签
添加书签
移除书签Ingress
apiVersion: networking.k8s.io/v1
import "k8s.io/api/networking/v1"
Ingress is a collection of rules that allow inbound connections to reach the endpoints defined by a backend. An Ingress can be configured to give services externally-reachable urls, load balance traffic, terminate SSL, offer name based virtual hosting etc.
apiVersion: networking.k8s.io/v1
kind: Ingress
metadata ()
Standard object’s metadata. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadata
spec ()
Spec is the desired state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
status ()
Status is the current state of the Ingress. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#spec-and-status
IngressSpec
IngressSpec describes the Ingress the user wishes to exist.
defaultBackend (IngressBackend)
DefaultBackend is the backend that should handle requests that don’t match any rule. If Rules are not specified, DefaultBackend must be specified. If DefaultBackend is not set, the handling of requests that do not match any of the rules will be up to the Ingress controller.
rules ([]IngressRule)
Atomic: will be replaced during a merge
A list of host rules used to configure the Ingress. If unspecified, or no rule matches, all traffic is sent to the default backend.
IngressRule represents the rules mapping the paths under a specified host to the related backend services. Incoming requests are first evaluated for a host match, then routed to the backend associated with the matching IngressRuleValue.
rules.host (string)
Host is the fully qualified domain name of a network host, as defined by RFC 3986. Note the following deviations from the “host” part of the URI as defined in RFC 3986: 1. IPs are not allowed. Currently an IngressRuleValue can only apply to the IP in the Spec of the parent Ingress. 2. The
:delimiter is not respected because ports are not allowed. Currently the port of an Ingress is implicitly :80 for http and :443 for https. Both these may change in the future. Incoming requests are matched against the host before the IngressRuleValue. If the host is unspecified, the Ingress routes all traffic based on the specified IngressRuleValue.Host can be “precise” which is a domain name without the terminating dot of a network host (e.g. “foo.bar.com”) or “wildcard”, which is a domain name prefixed with a single wildcard label (e.g. “.foo.com”). The wildcard character ‘‘ must appear by itself as the first DNS label and matches only a single label. You cannot have a wildcard label by itself (e.g. Host == “*“). Requests will be matched against the Host field in the following way: 1. If Host is precise, the request matches this rule if the http host header is equal to Host. 2. If Host is a wildcard, then the request matches this rule if the http host header is to equal to the suffix (removing the first label) of the wildcard rule.
rules.http (HTTPIngressRuleValue)
HTTPIngressRuleValue is a list of http selectors pointing to backends. In the example: -> backend where where parts of the url correspond to RFC 3986, this resource will be used to match against everything after the last ‘/‘ and before the first ‘?’ or ‘#’.
rules.http.paths ([]HTTPIngressPath), required
Atomic: will be replaced during a merge
A collection of paths that map requests to backends.
HTTPIngressPath associates a path with a backend. Incoming urls matching the path are forwarded to the backend.
rules.http.paths.backend (IngressBackend), required
Backend defines the referenced service endpoint to which the traffic will be forwarded to.
rules.http.paths.pathType (string), required
PathType determines the interpretation of the Path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by ‘/‘. Matching is done on a path element by element basis. A path element refers is the list of labels in the path split by the ‘/‘ separator. A request is a match for path p if every p is an element-wise prefix of p of the request path. Note that if the last element of the path is a substring of the last element in request path, it is not a match (e.g. /foo/bar matches /foo/bar/baz, but does not match /foo/barbaz).
- ImplementationSpecific: Interpretation of the Path matching is up to the IngressClass. Implementations can treat this as a separate PathType or treat it identically to Prefix or Exact path types. Implementations are required to support all path types.
rules.http.paths.path (string)
Path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional “path” part of a URL as defined by RFC 3986. Paths must begin with a ‘/‘ and must be present when using PathType with value “Exact” or “Prefix”.
tls ([]IngressTLS)
Atomic: will be replaced during a merge
TLS configuration. Currently the Ingress only supports a single TLS port, 443. If multiple members of this list specify different hosts, they will be multiplexed on the same port according to the hostname specified through the SNI TLS extension, if the ingress controller fulfilling the ingress supports SNI.
IngressTLS describes the transport layer security associated with an Ingress.
tls.hosts ([]string)
Atomic: will be replaced during a merge
Hosts are a list of hosts included in the TLS certificate. The values in this list must match the name/s used in the tlsSecret. Defaults to the wildcard host setting for the loadbalancer controller fulfilling this Ingress, if left unspecified.
tls.secretName (string)
SecretName is the name of the secret used to terminate TLS traffic on port 443. Field is left optional to allow TLS routing based on SNI hostname alone. If the SNI host in a listener conflicts with the “Host” header field used by an IngressRule, the SNI host is used for termination and value of the Host header is used for routing.
IngressBackend describes all endpoints for a given service and port.
resource (TypedLocalObjectReference)
Resource is an ObjectRef to another Kubernetes resource in the namespace of the Ingress object. If resource is specified, a service.Name and service.Port must not be specified. This is a mutually exclusive setting with “Service”.
service (IngressServiceBackend)
Service references a Service as a Backend. This is a mutually exclusive setting with “Resource”.
IngressServiceBackend references a Kubernetes Service as a Backend.
service.name (string), required
Name is the referenced service. The service must exist in the same namespace as the Ingress object.
service.port (ServiceBackendPort)
Port of the referenced service. A port name or port number is required for a IngressServiceBackend.
ServiceBackendPort is the service port being referenced.
service.port.name (string)
Name is the name of the port on the Service. This is a mutually exclusive setting with “Number”.
service.port.number (int32)
Number is the numerical port number (e.g. 80) on the Service. This is a mutually exclusive setting with “Name”.
IngressStatus
IngressStatus describe the current state of the Ingress.
loadBalancer (IngressLoadBalancerStatus)
LoadBalancer contains the current status of the load-balancer.
IngressLoadBalancerStatus represents the status of a load-balancer.
loadBalancer.ingress ([]IngressLoadBalancerIngress)
Ingress is a list containing ingress points for the load-balancer.
IngressLoadBalancerIngress represents the status of a load-balancer ingress point.
loadBalancer.ingress.hostname (string)
Hostname is set for load-balancer ingress points that are DNS based.
loadBalancer.ingress.ip (string)
IP is set for load-balancer ingress points that are IP based.
loadBalancer.ingress.ports ([]IngressPortStatus)
Atomic: will be replaced during a merge
Ports provides information about the ports exposed by this LoadBalancer.
IngressPortStatus represents the error condition of a service port
loadBalancer.ingress.ports.port (int32), required
Port is the port number of the ingress port.
loadBalancer.ingress.ports.protocol (string), required
Protocol is the protocol of the ingress port. The supported values are: “TCP”, “UDP”, “SCTP”
loadBalancer.ingress.ports.error (string)
Error is to record the problem with the service port The format of the error shall comply with the following rules: - built-in error values shall be specified in this file and those shall use CamelCase names
- cloud provider specific error values must have names that comply with the format foo.example.com/CamelCase.
IngressList is a collection of Ingress.
items ([]), required
Items is the list of Ingress.
apiVersion (string)
APIVersion defines the versioned schema of this representation of an object. Servers should convert recognized schemas to the latest internal value, and may reject unrecognized values. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#resources
kind (string)
Kind is a string value representing the REST resource this object represents. Servers may infer this from the endpoint the client submits requests to. Cannot be updated. In CamelCase. More info:
metadata (ListMeta)
Standard object’s metadata. More info:
Operations
HTTP Request
GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}
Parameters
name (in path): string, required
name of the Ingress
namespace (in path): string, required
pretty (in query): string
Response
200 (Ingress): OK
401: Unauthorized
read status of the specified Ingress
HTTP Request
GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status
Parameters
name (in path): string, required
name of the Ingress
namespace (in path): string, required
pretty (in query): string
Response
200 (): OK
401: Unauthorized
list list or watch objects of kind Ingress
HTTP Request
GET /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses
Parameters
namespace (in path): string, required
allowWatchBookmarks (in query): boolean
continue (in query): string
fieldSelector (in query): string
labelSelector (in query): string
limit (in query): integer
pretty (in query): string
resourceVersion (in query): string
resourceVersionMatch (in query): string
timeoutSeconds (in query): integer
watch (in query): boolean
Response
200 (): OK
401: Unauthorized
HTTP Request
GET /apis/networking.k8s.io/v1/ingresses
Parameters
allowWatchBookmarks (in query): boolean
continue (in query): string
fieldSelector (in query): string
labelSelector (in query): string
limit (in query): integer
pretty (in query): string
resourceVersion (in query): string
resourceVersionMatch (in query): string
timeoutSeconds (in query): integer
Response
200 (): OK
401: Unauthorized
create create an Ingress
HTTP Request
POST /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses
Parameters
namespace (in path): string, required
body: Ingress, required
dryRun (in query): string
fieldManager (in query): string
fieldValidation (in query): string
pretty (in query): string
Response
200 (Ingress): OK
201 (): Created
202 (Ingress): Accepted
401: Unauthorized
update replace the specified Ingress
HTTP Request
PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}
Parameters
name (in path): string, required
name of the Ingress
namespace (in path): string, required
body: , required
dryRun (in query): string
fieldManager (in query): string
fieldValidation (in query): string
pretty (in query): string
Response
200 (): OK
201 (Ingress): Created
401: Unauthorized
HTTP Request
PUT /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status
Parameters
name (in path): string, required
name of the Ingress
body: , required
dryRun (in query): string
fieldManager (in query): string
fieldValidation (in query): string
pretty (in query): string
Response
200 (): OK
201 (Ingress): Created
401: Unauthorized
patch partially update the specified Ingress
HTTP Request
PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}
Parameters
name (in path): string, required
name of the Ingress
namespace (in path): string, required
body: , required
dryRun (in query): string
fieldManager (in query): string
fieldValidation (in query): string
force (in query): boolean
pretty (in query): string
Response
200 (Ingress): OK
201 (): Created
401: Unauthorized
patch partially update status of the specified Ingress
HTTP Request
PATCH /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}/status
Parameters
name (in path): string, required
name of the Ingress
namespace (in path): string, required
body: Patch, required
dryRun (in query): string
fieldManager (in query): string
fieldValidation (in query): string
force (in query): boolean
pretty (in query): string
Response
200 (): OK
201 (Ingress): Created
401: Unauthorized
HTTP Request
DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses/{name}
Parameters
name (in path): string, required
name of the Ingress
namespace (in path): string, required
body:
dryRun (in query): string
gracePeriodSeconds (in query): integer
pretty (in query): string
propagationPolicy (in query): string
Response
200 (): OK
202 (Status): Accepted
401: Unauthorized
deletecollection delete collection of Ingress
HTTP Request
DELETE /apis/networking.k8s.io/v1/namespaces/{namespace}/ingresses
Parameters
namespace (in path): string, required
body:
continue (in query): string
dryRun (in query): string
fieldSelector (in query): string
gracePeriodSeconds (in query): integer
labelSelector (in query): string
limit (in query): integer
pretty (in query): string
propagationPolicy (in query): string
resourceVersion (in query): string
resourceVersionMatch (in query): string
timeoutSeconds (in query): integer
Response
200 (Status): OK
