Bower all the things

The problem I need to solve is; what is the best way to get some library code up on Github and make it easily accessible to users without having to clone the project? Because, that’s pretty lame, right?

Initially I came across generator-sass-boilerplate, a ‘Yeoman generator for quickly scaffolding out Sass styles’. This is a very interesting approach for creating a complex library and allowing the user to customize the install. But for a simpler library of code, maybe just some functions and mixins, this is way to much overhead.

Bower is the answer

Fast forward to now. I recently came across new posts that really break down what Bower is and what it is best at. And it hit me, this IS the answer!

For those not in the know, Bower is an extremely simple solution for front-end package management.

The beauty of Bower is held within it’s simplicity. Bower has a registry, but it’s not 100% necessary. The common command is where <package> can refer to a large number of options, thus making it dirt simple to just share some code. NICE!

Sticking with the ‘dirt simple’ theme, you can use Bower to easily pull a repo into your project without having to clone it. Even if it doesn’t have a bower.json file.

For example Stipe, a Compass Extension library I wrote, is not Bower aware at all.

Run that command in any folder and you will pull in the entire repo with no Github history. This alone is pretty interesting.

Getting started with Bower

To get started, it’s simple really. Assuming that Node and npm is installed on your local box, run:

  1. $ npm install -g bower

I won’t go into exhaustive detail here, but 99% of the time you simply need to run:

  1. $ bower install <package>

As stated above, there are alternate install options, but the primary solution is to have a bower.json file in the repo and have it registered with Bower.

If you have a bower.json file in your project, explained in the next section, you can add the --save flag with the install and this will add the library as a dependency in your project. Sweet.

This new system of creating and distributing resources raises an interesting question; do you commit all your bower packages or not? In the Ruby world, Gems are not actually part of the project, but dependencies of the project, and never committed to the project’s version control. In this new JavaScript world, Node and Bower package dependencies are referenced via a manifest, much like the Gemfile in Ruby, but are actually installed into the root of the project directory.

There is a whole discussion on this topic. I look at it this way, when you install a Bower library, are you leaving this as a dependency or are you making modifications?

The choice is up to you, the arguments are strong on either side. In a situation where you are actually forking the code you installed, then the answer is pretty clear, it should be committed to the project or you need to fork the dependency.

Generate new Bower package

Creating a new Bower package is again, really simple.

  1. $ bower init

In the CLI, this will initiate a series of questions, the answers of which will be plugged into the new bower.json file it creates. Put as much in as you want, but all you really need is:

And that’s it really. You have just created your first Bower resource library. Now go forth and build! Build out your resources, documentation, etc … your package is ready to go at any time.

For easy testing, remember the $ bower install git://github.com/ ... trick? Run this against a new repo and see how it installs.

Be mindful of this step and what the package contains. In my opinion, I see Bower as a great way to distribute smaller, specific libraries of code. When I pull in your Bower package, do I really want all your documentation, tests, demonstration resources, etc … As an example, I am going to pick on the Bourbon kids here, run:

  1. $ bower install bourbon

Running this installer, you will get the whole repo. I don’t want the whole repo, all I really want is what is in the dist/ dir. To solve this, another developer forked Bourbon and created a new repo called bower-bourbon:

Running this install you actually only get what is in the dist/ dir. But are these forks reliable? Ohh open source, you are a wild one.

UPDATE: It’s been brought to my attention that using the Bower install of Bourbon pulls in it’s 3.2 Beta and appears not to be fully functional. This section was not intended to say “bad Bourbon” but to simply illustrate that in some cases, using Bower, you will get more of the library then you really want.

Bower registration

Once you are ready for release, register it with Bower. The criteria is pretty simple:

  1. Make sure your repo has the bower.json file
  2. You must use

Once you have all of that, run this command with your new package name and the Git endpoint:

  1. $ bower register <my-package-name> <git-endpoint>

Bower and Sass libraries are an amazing pairing. There are small repos all over Github where the complexity of making them a Ruby Gem/Compass Extension was just to much overhead. You are required to either fork, clone, or god forbid, copy and paste code into your project. What? Are we not civilized?

In the Ruby world, developers are used to having Gems and Compass Extensions installed in a safe, *untouchable location. The new Gem is added to the Gemfile and we simply reference the library in the project.

*Untouchable is a frustration with many developers. Importing Sass libraries that they did not have control over, or were unable to modify, that actually output CSS can be very frustrating.

In the new JavaScipt world, the library is added to the bower.json manifest or simply installed, but instead of it being in a obscured location, it is installed into the root of the project. This keeps things simple from an install perspective, but this means our Sass imports are in relative directories. Not a big deal, but different from what we are used to.

So, what does a Sass Bower package look like? Let’s take a simple project I created called, . This package is simply a couple of mixins, one that allows the developer to easily create a @font-face set of rules and another is the ability to quickly generate a series of icon-font rules. The mini library comes with instructions and a very simple API.

Now, let’s imagine you are building a Node project and you want to use this package as a resource, run:

This installs the package and adds the dependency to your bower.json file. Located at the root level of the project is your sass/ directory, within that is your application.scss file. At your root is the bower_components directory. For your application.scss file to access the new library, you will need to import a relative path to the library, as illustrated in the following:

  1. @import "../bower_components/sass-icon-fonts/_ico-font.scss";

While the previous example works, while I found this acceptable, I didn’t really find it awesome. Digging more into the Grint-Sass API I discovered the function. This allows you to set an import path to include.

  1. options: {
  3.     './bower_components/bower-bourbon'
  4.   ]
  5. }

Now that you have this in your Grunt file, you can simply reference the library’s main manifest file with a simply Sass import, like so:

  1. @import "bourbon";

Bower in your npm

One of the things that I find slightly annoying about using Bower is that I have to run separate commands when initialing a new project. I already have to use npm, can’t I just bind these things together?

Yes, yes you can. In your package.json file, simply extend the scripts object and pass in the the bower install command. This is why I really LOVE this stuff!

Now, when you run npm install this will not only install all your Node packages, but install your Bower packages as well. NICE!

Bower behind the firewall

If you find yourself behind a firewall that does not allow for the git://[repo] protocol, there is a fix for this. First, I suggest maually doing a clone using the https://[repo] protocol to make sure that this is really the issue. If the https://[repo] protocol works, then you may want to make the following update:

  1. git config --global url."https://"

Thank you Stack Overflow!

No more forking, cloning, deleting .git/ directories just to include a library into a project. I am looking at creating Sass modules in a whole new light as well. Not that Compass extensions were difficult, but Bower frees me of multiple dependencies. Something that has been a real issue on many projects.